
- DHP419 Series of PP Yarn Stretching Machine
- DH419D Series PP FDY Multifilament Spinning Machine HT
- DHP418 Series PP FDY Multifilament Spinning Machine MT
- DHKV 1235-12 Polyester POY Spinning Line
- DHPE Ultra High Molecular Weight Polyethylene Yarn Spinning Equipment
- DHTA Aramid 1414 Yarn Spinning Line


Polyester spinning machine equipment mainly consists of:
This equipment is mainly used for spinning 50~150 denier polyester POY filament, the product is pre-oriented yarn. The raw material is polyester slice.
The equipment mainly includes: screw extruder, melt pre-filter, extruder head, spinning box, bibenzene boiler, metering pump and its drive, spinning assembly, side blowing, oiling device, tunnel, winding machine and electrical control system.
What should be noted when using polyester spinning machine?
1. Control the operation of slice drying and melt spinning to promote smooth operation.
2. Screw extrusion melt spinning is heated with biphenyl heat carrier. When the biphenyls heat up, they need to be vented slowly, so as not to bring the biphenyls out; It is strictly forbidden to approach the open flame when venting, and must not be discharged into the room to avoid fire and poisoning.
The temperature of the post is high, and it is necessary to do a good job of preventing and cooling.
3. The winding speed of the winding machine is very high, and it is easy to bring the hook into the operation if it is careless, causing the flying hook to hurt people. Therefore, it is necessary to educate the operator to concentrate on the manipulation and stand in a favorable safe position to avoid flying hook injury.
When winding the wire to the waste wire roll, if there are several strands of wire around the roll, then wrap the wire with one hand to hold the original strands, so as not to wind the hooks and cause flying hooks. When cutting the waste wire onto the waste wire roller, be sure to hold the brake device with a foot, and cut the waste wire with a knotting knife after stopping.
Jiangxi Donghua Machinery Co., Ltd. specializes in the production of polyester spinning machine, high-strength polypropylene spinning drafting machine, polypropylene spinning drafting machine, polyester spinning machine, high-strength and high-modulus polyethylene fiber spinning equipment, high vacuum dynamic drying - solid phase adhesion machine, arlon 1414 fiber spinning equipment, good quality, welcome to buy!