- DHP419 Series of PP Yarn Stretching Machine
- DH419D Series PP FDY Multifilament Spinning Machine HT
- DHP418 Series PP FDY Multifilament Spinning Machine MT
- DHKV 1235-12 Polyester POY Spinning Line
- DHPE Ultra High Molecular Weight Polyethylene Yarn Spinning Equipment
- DHTA Aramid 1414 Yarn Spinning Line
The grinding cycle of roving and spun rubber rollers is mainly determined according to the hardness, usage time and output of roving and spinning rubber rollers. The rubber rollers with different hardness have different grinding cycles, and the rubber rollers with the same hardness have different life cycles. (See table below).
In addition, the gap between the cores of the rubber roller can be adjusted to the rear drive.
If the gap between the front rubber roller bearings is too large, the impact on the strip CV value is between 0.1% and 0.6%; if the gap between the rear or middle rubber roller bearings is too large, the The impact is between 0.01% and 0.1%. Therefore, when the rubber roller bearing gap is large, it is generally used for the rear rubber roller. Because the running speed of the rear rubber roller is low, the impact is small, and the impact on the spinning quality is particularly small.
Jiangxi Donghua Machinery Co., Ltd. specializes in the production of polypropylene spinning machine, polypropylene strong spinning equipment, polypropylene high-strength spinning equipment, polypropylene spinning machine, polyester spinning machine, aramid 1414 fiber spinning equipment, DHP419 series high-strength polypropylene Spinning drafting machine, polypropylene spinning machine, DHP418 series polypropylene spinning drafting machine, DHkv1235-12 type polyester spinning machine, DHPE high-strength high-modulus polyethylene fiber spinning equipment, DHTA type aramid fiber 1414 fiber spinning equipment, HDZF3 High-vacuum dynamic drying-solid-phase viscosifying machine, polypropylene spinning machine.