[Safety Practice of Polyester Spinning Machine]
Release date:[2017/10/20] A total of reading[1151]time

(1) in the dressing of polyester spinning machine to clean the spinning surface, to wear protective gloves and anti-shake glasses, is strictly prohibited arm to prevent burns and high temperature melt splashed into the face.

(2) in the addition of heat media, to prevent running, running, dripping, leakage, such as infiltration to the insulation layer, the insulation layer must be completely removed part of the update. Disassembly of the system piping valves and flanges, to put the container, prepare the appropriate fire extinguisher, strict implementation of the fire system. In the case of


(3) cleaning corridors, mirrors, ring oiler, although the ring blowing head can be locked, but also take further security measures to prevent the ring blowing head down to hurt. In the case of


(4) the control system and field instrument display does not match the timely notice of the electrical sector and make a record. In the case of

(5) control cabinet instrument failure, to observe the field instrument display value, the alarm device failure to immediately repair time. In the case of


(6) steam phase heat medium temperature, it is necessary to strictly in accordance with the requirements of heating, the rate can not be too fast, so as not to cause accidents. In the case of


(7) ring oiler need to disassemble the tool to take prison, to prevent falling into the corridor caused by injury. In the case of


(8) Polyester spinning machine metering pump before starting to pan, or can not start, swap pump or pump shaft, to prevent the body or head collision to the other pump shaft.


Jiangxi Donghua Machinery Co., Ltd. focused on the production of polypropylene in the strong spinning equipment, polypropylene high-strength spinning equipment, polypropylene FDY spinning machine, polyester spinning machine, Kevlar 1414 fiber spinning equipment, DHP419 series of high-strength polypropylene spinning and drawing machine DHP418D series high-strength polypropylene spinning and drawing machine, DHP418 series of polypropylene spinning and drawing machine, DHkv1235-12 type polyester spinning machine, DHPE type high strength and high modulus polyethylene fiber spinning equipment, DHTA type aramid 1414 fiber spinning equipment, HDZF3 Type high vacuum dynamic drying - solid phase thickening one machine.


Related Categories:
Tel:0086-794--8242535 Fax:0086-794—8247560 E-mail:dh@jxdhjx.cn Add:No. 398, Changling Road, High-tech Zone, Fuzhou City, Jiangxi Province
all rights reserved Jiangxi Donghua Machinery Co., Ltd 技术支持:中国丙纶网如果本网站发布的文章或者图片或字体有侵权,请立即联系网站负责人进行删除,联系人:薛小姐 138 6101 6292,付小姐 153 1256 7839